From: FutureT@aol.com
Date: Thu, 16 May 2002 13:11:01 EDT
Subject: Re: [TSSP] Topload breakout potentials
Paul, I tried to measure the secondary resonant frequency, but I seem to see about 220kHz which doesn't seem correct. I counted either 69 or 70 turns per inch. It's 28awg with heavy formvar insulation. In the table, you mention a base height of 20 something inches. What does this base height refer to? The primary is located about 37.5" above a wooden floor. This floor is about 6 feet above a concrete basement floor. Cheers, John
Maintainer Paul Nicholson, paul@abelian.demon.co.uk.